I Still Dislike KiCAD¶
I made another attempt today to use KiCAD 5.0.2. There was a schematic for an 8-bit computer I wanted to investigate. In addition to looking at the actual circuit I wanted to see how KiCAD handled the separate schematic sheets that made up the project.
The KiCAD interface has once again left me frustrated. Zooming in an out with the mouse scroll is a pain as it zooms too much for the slightest movement. I have other issues with the way pan and zoom differs from other CAD packages but I don’t see this ever changing.
I did like the way I could enter the high level overview and then enter the individual hierarchical blocks. However moving between blocks required me to leave and renter the sheets. I went looking for something that would allow me to switch between the sheets that made up the whole schematic. I found box that would open up and allow me to select the sheet I wanted. It would then immediately close again. Not great if you want to switch back and forth between sheets quickly. When using DipTrace I have been able to have tabs for each sheet along the bottom of the screen and can easily switch between them. I cannot see anything in KiCAD that allows the same functionality.
I’m sure there is a lot to like about KiCAD but there is so much I dislike about it I can find a reason to persevere with it. I would submit a bug report or two but I have found existing reports to the issues which the developers don’t intend to fix.